Self-priming electric vortex water pump with handle

Pump>> Pump Body: cast iron & support under special anti-rust treatment>> Impeller: stainless steel impeller, brass impeller, ppo impeller>> Mechnical Seal: carbon / ceramic / Stainless SteelMotor>> Bulit-in thermal protector for single phase motor>> Motor with copper winding>>&n

Featured Products


Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel


Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44


Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System


PS126 / PS126-S WATER PUMPS FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water. 
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                                
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor. 
Besides, thermal protector in motor will interrupt current when motor overheats.



Self-Priming Electric Automatic Vortex Water Pump with Handle

                                                          
Technical Data
 
ModelHPWCurrent (A)Capacitor (uf)H.Max (M)Q.Max (L/min)Pipe SizePressure Set (bar)Tank (L)
PS1350.53701.81034351"X1"1.3-2.32
PS1360.53701.81034351"X1"2.3-3.32
PS126-S0.53701.81034351"X1"  
         
Self-Priming Electric Automatic Vortex Water Pump with Handle




FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours