CHL Light Horizontal Multistage Centrifugal Pump
CHL,CHLK and CHLF(T) type pump are mainly used in industrial field:
*Water treatment(Water purification)
*Other special application
*Thin and clean non-flammable and non-explosive liquid without solid granules and fibers.
*Mineral water, soft water, pure water, edible vegetable oil and other light chemical mediums.
*When the density or viscosity of to-be-conveyed liquid is larger than that of water, it is necessary to select a driving motor of high-power.
*Whether a specific liquid is suitable for the pump depends on many factors, amongwhich the most important ones are chlorine content, PH value, temperature, solvent and oil content.
1.Horizontal multistage non-self-priming centrifugal pump, attached with long shaft electric motor.
2.Compact structure renders small size of pump: axial inlet and radial outlet.
Following conditions are suitable for the performance curves shown above:
*All curves are based on the measured values of 50Hz: constant motor speed 3500r/min;
*Curves tolerance in conformity with CE;
*Measurement is done with 20 ºC are-free water, kinematic viscosity of 1mm ² /sec;
*The operation of pump shall refer to the performance region described by the thickened curve to prevent overheating due to too small flow rate or overload of motor due to too large flow rate.
*TEFC motor 2-pole
*Protection class: IP55
*Insulation class: F
*Standard voltage, 50Hz: 1x220-240V
*Standard voltage, 60Hz: 1x220-240V
*Single phase motor(max): 2.4kw
Normal temperature type: -15 ºC~+70 ºC
Hot water type: -15 ºC~+110 ºC
Ambient temperature: up to +40 ºC
Max.operation pressure: 10 bar
Max.inlet pressure is limited by max.operation pressure.
|Working Principle:||Centrifugal, Multi-stage|
|Power Specs:||220V/380/415V 3phase; 220/240V 1phase; 50hz/60hz,etc|
|Max.permissible fluid temperature:||80ºC/120°C(hot water type)|
|Type of connection:||Flange connection|
|Impeller/diffuser/inducer/shaft mateiral:||Stainless steel 304 or 316|
|Shaft seal type:||Mechanical seal|
|Maximum drive rating:||110KW(150HP)|
|Maximum dischrage-side pressure:||2.55MPa(25.5bar)|
|Flow rate range:||1-240m3/h(4.4-1056US.GPM)|
50HZ Pump Performance Scope
Section drawing CHLFT2:
Section drawing CHLFT4:
Section drawing CHLFT8:
Section drawing CHLFT12:
Also we have CRK20 ,if you need ,you can contact us
we can supply the detail drawing if you need ,
Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.
Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. but they're unfree.
Question 3: Where is your factory located? How can I visit there?
Answer: Our factory is located in Ningbo, China. You can fly to Ningbo or Shanghai airport directly. All our clients, from home or abroad, are warmly welcome to visit us!
Question 4: How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001 authentication.
Question 5: How about the lead time?
Answer: Within10-50 days after getting the prepayment.
Question 6: How can we pay?
Answer: For small sample shipping cost, you can pay either by paypal or by T/T. And by T/T at sight for large amount of the order.
Question 7: If OEM available?
Answer: Yes, we provide all of our products OEM /ODM service.