Heavy Duty Mud Pump Centrifugal Propeller Pump Large Submersible Mud Pump

Summarize of Stainless Steel Floating High Flow Submersible Axial Flow Water Transfer PumpInstallation of water flow Channel: in terms of recommended sample installation diagramThe form of water exit: flap valve or other waysInstallation ways: Floor fixed type, suspended type, floated type and diagnal installed type;Max. Capacit

Featured Products

Summarize of Stainless Steel Floating High Flow Submersible Axial Flow Water Transfer Pump
Installation of water flow Channel: in terms of recommended sample installation diagram
The form of water exit: flap valve or other ways
Installation ways: Floor fixed type, suspended type, floated type and diagnal installed type;
Max. Capacity: 90000m3/h
Max. Head: 20m


Heavy Duty Slurry Pump Centrifugal Propeller Pump Large Submersible Slurry Pump


Motor of Stainless Steel Floating High Flow Submersible Axial Flow Water Transfer Pump
  1. Submersible motor
  2. Power Level: electrical performance conforms to GB756
  3. Protection level: IP68
  4. Voltage grade: ≤1300kw, voltage, 380v, 660v, 6000v, 10000V
  5. Insulation level: F
  6. Rated frequency: 50Hz/60Hz

Heavy Duty Slurry Pump Centrifugal Propeller Pump Large Submersible Slurry Pump


 
Shaft seal of Stainless Steel Floating High Flow Submersible Axial Flow Water Transfer Pump
There are two or three stages of mechanical seal. The first stage called carborundum (directly contact with water). The second and third stage called graphite and carborundum.
Leak proof Equipment of Stainless Steel Floating High Flow Submersible Axial Flow Water Transfer Pump
Sinoflo Axial/Mixed Flow Pump have been equipped with leak proof sensors. When the oil tank, the inner part of motor or the junction box has been leaked by water, the sensor will signal or made the motor shut down, and retain the malfunction signal.
Over heating protection system of Stainless Steel Floating High Flow Submersible Axial Flow Water Transfer Pump
A overheating protection device is fastened on the motor winding. When the temperature exceeds the stated value, the device will signal or made the motor shut down.
Rotation direction:
Seen from the top of the motor, the impeller is rotating clock wisely.

Heavy Duty Slurry Pump Centrifugal Propeller Pump Large Submersible Slurry Pump




Application of Stainless Steel Floating High Flow Submersible Axial Flow Water Transfer Pump
Sinoflo axial/mixed flow pump is widely used in industry and agriculture water lifting, urban water supply, light polluted water discharge and other water transfer project.
Working condition of Stainless Steel Floating High Flow Submersible Axial Flow Water Transfer Pump
Clean water with the temperature no more than 50 or some liquids that are similar to water.
Heavy Duty Slurry Pump Centrifugal Propeller Pump Large Submersible Slurry Pump
Heavy Duty Slurry Pump Centrifugal Propeller Pump Large Submersible Slurry Pump

Heavy Duty Slurry Pump Centrifugal Propeller Pump Large Submersible Slurry Pump

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours